You are here

How to put MMSI number in a Silva VHF

1 post / 0 new
Anonymous (not verified)
Anonymous's picture
How to put MMSI number in a Silva VHF

For what its worth, this was found on the net.

HOW TO RE ENTER THE MMSI, SELECT CHANNEL SETS, PRIVATE CHANNELS AND CLEAR THE MEMORY ON A SILVA S15 VHF RADIO.

1). Press "PTT" and "CH16" key and hold, turn on the S15 .

2). To enter the system setup mode. Input password "198008" and press enter.

3). To change the MMSI use key on fist mike to select 'MMSI SET' then press enter. Use the numeric keypad to enter new MMSI then press enter.

4). In the system setup mode, use key to select "CHANNEL SECTION" form menu and press "ENT" to accept.

5). In this case, use key to select a International UK, USA or Canadian channel set and press "ENT" to accept.

6). M1 & M2 channels are included in the 'K' (UK) channel set.

7). To Clear the memory use to select 'clear memory' press ENTER key. The unit will then ask you to confirm. For YES press ENTER for NO press CLEAR.

. To add private channels (some early models do not have this facility) use key to select 'PRIVATE CHANNELS' press 'ENTER'. Enter private channel (00 – 159) on P0 then press 'ENTER'.
Use up arrow to select channel P1 then enter 2nd private channel (if required) then press 'ENTER' again. Return to menu and select EXIT as described in (9) below.

9). Select "EXIT" in the menu and press "ENT" to exit system setup mode and restart the S15 device.

123